EMF Radiation Protection – Protect, Shield and block Electromagnetic Radiation(EMF/EMR)
When there is a need to protect yourself, your house or/and office from the entrance of EMF radiation, in order to reduce your exposure to EMF radiation, we recommend to use EMF Radiation protection.
Protection from EMF(Electromagnetic Frequencies Radiation, also known as Electromagnetic Radiation -EMR) is the fourth step (last) in our ‘4 Steps Program’.
Protection is the last step
Before using EMF protection you should first acquire basic knowledge of EMF radiation, know how to measure EMF, and have already done your very best to reduce your exposure by stopping the use of any wireless and cellular device, moving to wired technologies and infrastructure.
Using EMF protection without knowledge, while using wireless devices, without exposure reduction is a bad thing to do. Trying to install EMF protection without an EMF meter, is a big guess that will most likely be a wrong guess.
When to use EMF protection?
When you can’t reduce your exposure in any other way, and when the only option left is protection, you should use EMF protection according to the need, environment, measurement, and type of EMF.
Perview to EMF protection
Video “Preview to EMF Protection” link- https://www.youtube.com/watch?v=fk7GlDixYgI
Home Protection
In case you need to protect the home/office, we will use Protection equipment and methods that are focused on blocking the EMF from getting info on the protected area. This is usually done by windows films, curtains, Fabrics, Paints, and metal plates.
Personal Protection
In case you need to reduce your body exposure to EMF (especially RF) we will find ways to reflect the EMF before it hits your body. This is usually done by fabrics, hats, clothes, and other protective gear. This of course should be done after you stopped using a cellphone and wireless devices, and is restricted to Electricmangetic Hypers Sensitive people.
ELF Protection
Extreme low-Frequency protection is much more complex than RF protection. Therefore I think it should be done by professionals only. The ability to block ELF magnetic field is very limited. You can block it if it comes from a power switch cabinet or a smart meter. But you can’t block ELF magnetic field coming from the electric infrastructure in the street.
Dirty Electricity protection
If you still have high levels of Dirty Electricity after allocating and removing the sources, you can use DR filters. They should be installed keeping in mind they emit ELF electric and magnetic fields. So you should also keep safety distance from the filters, and install them far from the bed and location in the house where you sit and sleep. 1-2 meters safety distance should be enough. although some EHS people might need larger distances.
Magic devices don’t work
Magic devices are stickers, bracelets, gulleries, necklaces, and other products that suppose, by some magical technology or some kind of “magic”, “holistic”, “quantum physics”, “patented”, “impossible to explain/share/measure” effect to improve your body ability to coop with the radiation, neutralize it, or make the radiation less harmful.
I am strongly against the use of these magic devices. Not only they don’t affect the exposure, but they give people a false sense of confidence and drive these people away from real knowledge, exposure reduction, and protection.
PROFESSIONAL or ‘DO IT YOUR SELF’?
As far as RF radiation protection, in some cases, it is possible to order the materials and install the protection yourself (DIY).
When the Protection is more complicated, such as in the case of ELF magnetic fields and some of the cases of RF, it is best to get the help and service of professional installers.
EMF PROTECTION SUB PAGES
Check out our products on our store site
This Post Has 2 Comments
Leave a Reply
You must be logged in to post a comment.
Dear Sir, I find your website honest and well-structured.
I have a question: I am EHS-sensitive and in the process of bying a new car.
All new cars have rather extensive screens around the dashboard these days, not only in front of you behing the steering wheel, but also in the middle console.
I feel the radation of these screens, as if I am working on a laptop (which I do very rarely because of EHS).
Is there an anti-EMR foil which I can glue on the screens and that blocks the direct radiation coming from the screens (similar to a screen protector for an ipad), while I can continue to use them as a touchscreen?
I am not talking about blue light to my eyes, but the EMF radiation that goes to my brain while sitting in the driver seat, independently of whether I have my eyes closed or not.
Do you have any other advice about this (of course there is a baseball cap or a baseball cap with a neck protector, or this whole “face and neck covered hood” which I saw in the photos but which is really too drastic (and too hot) a solution for me. It makes me look like a bee-keeper in my car.
I am interested in your ideas,
and thanks in advance,
Eric
Hello
These screens emits some electric field. Some emit also RF radiation, In addition there are other RF sources in the car.
All RF sources needs to be found and then the RF should be turned off or the device changed (if passible) with none-RF emitting device.
For the Electric field from the screens (also from the laptop) we have a film you can try out.
Please see our store site – https://www.4ehsbyehs.com/product/led-lcd-screen-protection-film/
amirb