Post from the past 2019 - DIY RF ALARM SYSTEM FOR YOUR HOUSE!!!

Found this page helpful? Please like. Wants to help other and spread awareness? Please share

Created: FRIDAY, AUGUST 16, 2019
Link to the original post – https://norad4u.blogspot.com/2019/08/diy-rf-alarm-system-for-your-house.html

DIY RF ALARM SYSTEM FOR YOUR HOUSE!!!

If you are an EHS person (Electromagnetic Hypersensitive person) you probably experienced what if feels like when you open the door of your house and a person with a smartphone or other RF-emitting device, comes into your house. At first, you might not notice it, but after a while, you will start feeling the pain.
In order to reduce the chance of that happening we need an RF ALARM SYSTEM that will go off when it detects an RF signal.

It is possible to do it using the ENV RD10 that can beep when the RF levels are higher than 0.5mW/m2, or with the CORNET ED88TPLUS (update from 2023, it is also possible to do with the CelloEye detectors, see end of post) that sounds the alarm when RF levels are higher than 0.18mW/m2. In the case of the CORNET ED88TPLUS you can also add an external speaker that will make the alarm sound very loud.
Both the ENV RD10 and the CORNET ED88TPLUS can be used with an external power supply.
For those of you who turn off the electric power, both meters (and speakers) can be used with an external power bank.

I would like to thank Shanny Druker for presenting the need for such a system.

Video – DIY HOME USE RF ALARM SYSTEM – FULL
https://youtu.be/COe8Ps27dC4

Video – Basic RF ALARM SYSTEM RD10

https://youtube.com/watch?v=-ZvBILeeDS0%3Ffeature%3Dplayer_embedded

RF ALARM SYSTEM ED88TPLUS

https://youtube.com/watch?v=wujcEmBb53Y%3Ffeature%3Dplayer_embedded

Parts needed for the ENV RD10 ALARM Setup

1. EMF RD10 EMF meter – http://www.4ehsbyehs.com/emr-meters/env-rd-10

2. USB 2 miniUSB cable – comes with the ENV RD10 meter, can be squired at – https://amzn.to/31NV71v

3. USB Power supplier – https://amzn.to/31GDq3J

Parts needed for the CORNET ED88TPLUS ALARM setup

1. CORNET ED88TPLUS EMF meter – http://www.4ehsbyehs.com/emr-meters/cornet-ed88Tplus

2. USB 2 MicroUSB cable – https://amzn.to/2KVFGNY

3. USB Power supplier – https://amzn.to/31GDq3J

4. Optional – External USB powered speaker – https://amzn.to/31M7drB

5. Optional – Power bank – https://amzn.to/2yYXbr1

New options (2023) – CelloEye setup

In 2022 we started selling the CelloEye detectors that were developed by envirosense.com and without help. These detectors are small, cheap, can work for years without changing the battery, and blink a light and sound an alarm when RF is detected. This makes them optimal as an RF home alarm.
Blinks a Light – https://www.4ehsbyehs.com/product/celloeye/
Blinks and sound the alarm – https://www.4ehsbyehs.com/product/celloeye-24gs/

Video – https://youtu.be/uBUsmc80sHo