ENV RD10 EMF RF/ELF-M/ELF-E Detector

Found this page helpful? Please like. Wants to help other and spread awareness? Please share

The ENV RD10 is a simple home-use EMF meter with light indication (if you want a recommended meter with detailed numeric and graphic display please see – CORNET ED88TPLUS EMF RF/ELF-M/ELF-M Meter) , with RF & ELF Magnetic & ELF Electric fields capabilities. With more than 200000 samples per second .

Order from our store site www.4EHSByEHS.com

Low price Home use RF/ELF EMF meter with Led Light and advanced features via USB connection.
For those of you who need a fast & simple to operate EMF detector. For those who in a need to a pocket-size alarm detector.
Measure RF, ELF-Magnetic, ELF-Electric fields.
The USB connection for recording the measurement, for software upgrades and more.

Description

A very small, fit into your pocket, very fast and sensitive EMF (both RF/ELF-M/ELF-E) Radiation detector. Can be used as a simple EMF Smog meter, showing the levels via the color led bar. It can be used as an Alarm RF/ELF detector for EHS (Electromagnetic Hypersensitivity) people. The ENV RD10 meter can be used as an RF/ELF-E/ELF-M monitor while connected to a PC. The connection is done using a mini USB cable. The meter has an Internal rechargeable (via USB) battery that can last for hours.

The fast sampling rate will allow the meter to pick up even the fastest RF signals.
The mete displays the levels of EMF over a Green-Yellow-Red Led lights, making it easier to read even if you are not an expert. If you are an advanced user, you can connect the meter to a PC and get the exact readings.

Advantages and features

Very fast sampling rate – Most important (20000 sampling every second)!
Very Easy to operate and read
Both RF and ELF (magnetic & Electric fields) in one very cheap meter.
Rechargeable batteries (via Mini USB)
Small case – Fits into every pocket
Advance features for advanced users via Mini USB connection to a PC
Future software update via Mini USB
Super sensitive RF alarm mode will allow you to walk around with the meter for hours. The meter will alert you, with beep sound, if turned ON, when being in a high RF environment or close to an RF source or a cell phone user.
Audio Feedback – beeps
USB connection
Color Led Light Bar
Single Axis RF meter, mW/m2, dBm, bandwidth of 100MHz-8GHz
Single Axis LFE magnetic meter, mGauss, uT, bandwidth of 50-10KHz
Single Axis LFE Electric field meter, V/m, bandwidth of 50Hz-50KHz
Sampling rate: 20,000/sec, display rate 5/sec.
Internal antenna and sensors.
90 days money back guarantee
1-year warranty
Made in ISRAEL
Software and future updates can be download from http://www.envirosens.com/

Disadvantages

Single axis
No numeric display

Bottom line

Great & cheap EMF detector for those who need a Red-Yellow-Green indication, for those of you who need the alarm, or for those who what to do some monitoring (with a PC).

Manufacturer’s datasheet:

RF Frequency range: 100MHz to 8GHz
RF measuring range: -60dBm to +5dBm
RF Typical accuracy: ±6 dB
LFM (magnetic field) Frequency range: 50Hz to 10KHz
LFM measuring range: 0mG to 50mG with 0.1mG resolution
LFM accuracy: 20%
LFE (electric field) Frequency range: 50Hz-50KHz
LFE measuring range: 2v/m to 1000v/m
LFE accuracy: 25%
Display: Sampling rate:
Sampling rate: 20,000/sec (updates 5 times a second on the LEDs / 2 times a second for USB data)
RF technologies: Analog RF and Digital burst RF (GSM, TDMA,CDMA, LTE, DECT, ZigBee, Bluetooth, UWB, Wi-Fi, WiMAX 2.4GHz, 3.6GHz, 5.8GHz, 2,3,4 generations).

Downloads

Download manual: http://www.envirosens.com/software/manual/env-rd-10.pdf
Download PC USB driver: http://www.envirosens.com/software/driver/CDM21228_Setup.exe
Download PC monitor software: http://www.envirosens.com/software/Monitoring.zip
Download device firmware (1.0.62): http://www.envirosens.com/software/firmware-update.zip
Download Android (4.3 and higher) monitor software: http://www.envirosens.com/software/ENV_Monitor.apk